Microsoft ES4649 Manual de usuario descargar pdf (Pagina 597)

IP Routing Commands

4-269

4

Default Setting

Disabled

Command Usage

• This command can be used to advertise routes between areas.

• If routes are set to be advertised, the router will issue a Type 3 summary LSA

for each address range specified with this command.

• This router supports up 64 summary routes for area ranges.

Example

This example creates a summary address for all area routes in the range of 10.2.x.x.

area default-cost

This command specifies a cost for the default summary route sent into a stub or

not-so-stubby area (NSSA) from an Area Border Router (ABR). Use the no form to

remove the assigned default cost.

Syntax

area area-id default-cost cost

no area area-id default-cost

• area-id - Identifier for a stub or NSSA, in the form of an IP address.

• cost - Cost for the default summary route sent to a stub or NSSA.

(Range: 0-65535)

Command Mode

Router Configuration

Default Setting

1

Command Usage

• If you enter this command for a normal area, it will changed to a stub.

• If the default cost is set to “0,” the router will not advertise a default route into

the attached stub or NSSA.

Example

Related Commands

area stub (4-272)

Console(config-router)#area 10.2.0.0 range 10.2.0.0 255.255.0.0 advertise

Console(config-router)#

Console(config-router)#area 10.3.9.0 default-cost 10

Console(config-router)#

1 2 ... 592 593 594 595 596 597 598 599 600 601 602 ... 673 674

Comentarios a estos manuales

Sin comentarios

Klepnutím na abecedu níže přejděte na úplný seznam modelů začínajících tímto písmenem

All
0-9
g
m

Modely	Typ Dokumentu
GPS 3000 XL	Uživatelský manuál Magellan GPS 3000 XL User's Manual, 101 stránky
GPS 4000 XL	Uživatelský manuál Magellan GPS 4000 XL User's Manual, 105 stránky