Microsoft Pre-Install Intel® AHCI Driver for Windows XP Manual de usuario descargar pdf

Page 1 of 4

Pre-Install Intel® AHCI Driver for

Windows XP® Operating System

Pre-Installation Using the F6 Method

Notes:

Before you start to install Microsoft® Windows XP® operating system, you will need an

optical drive, a USB floppy disk drive, a blank 1.44MB floppy diskette, and Microsoft®

Windows XP® Professional/Home Edition Setup Disc (bootable).

1. Extract AHCI F6 driver files to a blank 1.44MB floppy diskette. Make sure the following files are

contained in the root directory:

2. Connect the USB floppy drive and then boot up from the Microsoft® Windows XP®

Professional/Home Edition Setup Disc to install operating system.

1 2 3 4

Page 1 of 4 Pre-Install Intel® AHCI Driver for Windows XP® Operating System Pre-Installation Using the F6 Method Notes: Before you start to install

Page 2 of 4 3. At the beginning of the operating system installation, press [F6] to install a third party SCSI or RAID driver. 4. When prompted, s

Page 3 of 4 5. Insert the floppy diskette you created in step 1. 6. At this point you should be presented with a selection for one of the followin

Page 4 of 4 7. Highlight the selection that is appropriate for the hardware in your system and press Enter. 8. Press Enter again to continue. Leav

Sin comentarios

Microsoft Pre-Install Intel® AHCI Driver for Windows XP Manual de usuario