Microsoft Computer Hardware System Board Manual de usuario descargar pdf (Pagina 51)

Award BIOS Setup Utility

Parallel Port Mode, ECP Mode Use DMA and EPP Mode Select

These fields will appear only if you selected an I/O address and IRQ

in the Onboard Parallel Port field. These apply to a standard

specification and will depend on the type and speed of your device.

Refer to your peripherals manual for the best option.

The parallel modes are SPP, EPP, ECP and ECP+EPP. The default is

ECP+EPP. Both ECP Mode Use DMA and EPP Mode Select will

appear on the screen. If you selected EPP, EPP Mode Select will

appear. This field applies to standard specification. The options are

EPP1.9 and EPP1.7. Default setting: EPP1.7. If you selected ECP, ECP

Mode Use DMA will appear. This is used to select a DMA channel

for the parallel port. The options are 1 and 3. Default setting: 3.

Keyboard/Mouse Power On

This field allows you to use the keyboard or mouse to power-on the

system. To use this function, make sure JP1 is set to 2-3 On - the

Wake-On-Keyboard/Mouse function enabled. Refer to Jumper Settings

for Wake-On-Keyboard/Wake-On-Mouse in chapter 2 of this manual

for more information.

Disabled Default setting.

Warning:

If JP1 was previously enabled with a password

set in the KB Power On Password field, and

now you wish to disable the Wake-On-

Keyboard (password) function, make sure to

set this field to disabled prior to setting JP1 to

disabled (1-2 On). You will not be able to boot

up the system if you fail to do so.

Password When this option is selected, the KB Power On

Password field will appear. Move the cursor to this

field and press <Enter>. Enter your password. You can

enter up to 5 characters. Type in exactly the same

password to confirm, then press <Enter>.

Important:

The power button will not function once a

keyboard password has been set in the KB

Power On Password field. You must type the

correct password to power-on the system.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Sin comentarios

Microsoft Computer Hardware System Board Manual de usuario Pagina 51