Microsoft RAMCard C-97200 Manual de usuario descargar pdf (Pagina 9)

Solid/PowderSampleHolder

(Cat. No. 206-67779)

・

Used for the measurement of solid or

powder samples in the reflection

mode.

・

The angle of the holder is adjusted so

that the directly reflected excitation

beam may not enter the emission

monochromator.

・

Standard accessories

Powder sample tray: 1 pc.

Quartz plate: 1 pc.

Spacer 1: 2 pcs.

Spacer 2: 1 pc.

Powder leveling rod: 1 pc.

Spacer 2: 1 pc.

Powder leveling rod: 1 pc.

・

Options

Filter set

(Cat. No. 206-80154)

Minimizes the influence of scattered light.

8 mm dia. Test Tube Holder

(Cat. No. 206-69956)

・

Holds a test tube, 8 mm OD.

・

Used for measurements in a wavelength

range longer than 400 nm, because

the ordinary glass used for test tubes

are opaque in the UV region. Test

tubes made of Pyrex glass are used

in a wavelength range longer than

350 nm.

・

Accepts a test tube, 8 mm OD and 50

to 85 mm long.

・

Options: 8 mm dia. test tube (Pyrex glass)

(Cat. No. 208-97200)

12mm dia.Test TubeHolder

(Cat. No. 206-67777)

・

Holds a test tube, 12 mm OD., in

place of an ordinary square cell.

・

Used for measurements in a

wavelength range longer than 400

nm, because the ordinary glass used

for test tubes is opaque in the UV

region. Test tubes made of Pyrex

glass are used in a wavelength range

longer than 350 nm.

・

Accepts a test tube, 12 mm OD and 45

to 85 mm long.

・

Options: 12 mm dia. test tube (Pyrex glass)

(Cat. No. 200-93068)

Flow-Thru Cell Unit

for HPLC

(Cat. No. 206-69220)

・

Converts an RF-1501 into a spectroflu-

orometric detector for HPLC.

・

An analog output interface is required

when the data is to be processed with

a data processor, e.g. Chromatopac.

・

Standard accessories

Flow-thru cell: Square cell made of

fused silica

Cell volume: 12

μ

L

Pressure resistancy of cell:

2.9

×

10

6

Pa (30 kgf/cm

2

)

・

Related items

Analog Output Interface

(Cat. No. 206-69240)

Sensitivity Enhancing

Cell Holder

(Cat. No. 206-67783)

・

Enhances measuring sensitivity two or

three times, by reflecting back the

light that has transmitted through the

cell to make it pass the cell again, to

raise the excitation efficiency.

・

Also enhances the light capture yield

by reflecting the emission beam,

emitted to the other side of the

emission monochromator, back to that

monochromator.

Constant-Temperature

Cell Holder with Stirrer

(Cat. No. 206-80496)

・

Keeps the sample cell at the desired,

constant temperature, by circulating

temperature controlled water.

・

Effective for temperature-sensitive

applications, such as measurement of

intracellular calcium ions.

・

Equipped with a magnetic stirrer to stir

the sample during measurement.

(The stirrer controller is required,

which is described below.)

・

Specifications

Method: Forced circulation of temperature

controlled water

Applicable sample cell: 10 mm square

cell polished on four sides

Circulating water temperature:5

℃

to

60

℃

Stirrer speed: 100 to 1,000 r.p.m.

・

Related items

CC301 Stirrer Controller

(Cat. No. 044-31006-

**

)

NTT-1200P Constant-Temperature Water Circulator

(Cat. No. 208-97242)

9

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios